网上娱乐送彩金

网上娱乐送彩金 > Products > SIEI inverter> Product details

Xiwei DC Speed Regulator TPD32 Series

Xiwei DC Speed Regulator TPD32 Series Model:

* TPD32-500 / 520-20-4B

* TPD32-500 / 520-40-4B

* TPD32-500 / 520-70-4B

* TPD32-500 / 520-110-4B

* TPD32-500 / 520-140-4B

* TPD32-500 / 520-185-4B

* TPD32-500 / 520-280-4B

* TPD32-500 / 520-350-4B

* TPD32-500 / 520-420-4B

* TPD32-500 / 520-500-4B

* TPD32-500 / 520-650-4B

* TPD32-500 / 520-770-4B



Related Products:
  • Overview:

    系列整流装置为三相交流电源直接供电的全数字控制装置, 其用途为调节它励直流电动机的速度和转矩。 The TPD32 series rectifier is a full digital control device directly powered by three-phase AC power. Its purpose is to adjust the speed and torque of its DC motor. Its compact structure, powerful functions and stable product performance can meet the speed regulation requirements of various productions and processes. 15 4800A ,并可通过并联可控硅单元进行扩展。 The design current range is 15 to 4800A and can be expanded by connecting thyristors in parallel.

    Technical Characteristics of Xiwei DC Speed Regulator TPD32 Series

    1 There are two types of TPD32 converters: · TPD32… 2B two-quadrant converter · TPD32… 4B four-quadrant converter
    2 This DC drive can be controlled in different ways: Terminal board keyboard RS485 serial interface bus connection (optional)
    3 The required setting is achieved by changing the Main commands and Control mode parameters in the CONFIGURATION menu.
    4 The device is equipped with user interface software used in the MS-WINDOWSTM environment to control the drive through the RS485 serial interface.
    5 The factory setting of the device is to use the cascade current adjustment method for speed regulation, and connect according to the wiring diagram shown in the "standard wiring diagram". The initial test run of this device only needs to enter the parameters of the DC motor into the software's START UP menu. The drive can then be controlled via the terminal board after all parameters have been set via the keyboard (START UP / Main Commands).
    6 If the required functions do not exist in the standard configuration, you can select these functions and set their parameters via the corresponding menu.
    7 Expansion of standard devices with programmable I / O requires a TBO optional card. Can install up to 2 TBOs. Each has 4 digital inputs, 4 digital outputs, and 2 analog outputs. There are three analog inputs on the standard transmission.
    8 The TPD32 series transmission can use different units of measurement to set the parameter values of the given integrator (RAMP) and speed regulator: · Percent Speed Base value Gang), for example, the speed is expressed in m / s. The freely selectable password 1 will prevent casual personnel from operating the drive without authorization. It is entered as a combination of five digits. Password 2 is provided by the manufacturer. This password enables maintenance personnel to access maintenance menus that the user cannot access.

    Xiwei DC Speed Regulator TPD32 Series Features

     

    Features

    TPD32 系列变流器装置具有极佳的调节特点和很宽的调节范围。 · TPD32 series converter device has excellent adjustment characteristics and wide adjustment range.

    · Extremely stable hardware system.

    · Easy-to-use debugging software.

    · Continuous data recording tester.

    · The magnetic field conversion part is integrated.

    · The power is electrically isolated from the regulator and has high impedance.

    · I/O 口电气隔离。 The regulating part is electrically isolated from the digital I / O port.

    · Differential analog input.

    · LED 标准组件( KC ),安装在装置的前盖上。 Provides LED standard components ( KC ) with diagnostic functions , mounted on the front cover of the device.

    · Detachable optional operation panel.

    · Easy to master "Basic Menu".

    · easy to use

    1.   Through terminal operation,
    2. Operate through the panel with indicator light,
    3. PC 程序和 RS485 串口操作, Operate by default PC program and RS485 serial port,
    4.   DRIVECOM 协议的 INTERBUS S 总线, PROFIBUS DP 操作 , Operation via fieldbus (optional), INTERBUS S bus with DRIVECOM protocol , PROFIBUS DP ,

    · 10 个故障信息和故障时间。 Can store the first 10 fault information and fault time.

    · The action of the device can be set individually for each fault alarm.

    · When the speed feedback signal is lost, it can be automatically converted into armature feedback (constant torque working mode).

    · Overload control.

    · There are three freely definable analog inputs in the standard configuration.

    · / 输出,模拟量输出板。 Optional digital input / output, analog output board.

    · Whether to set the reference signal and display the feedback signal in percent or in other dimensions are defined by the user.

    · Speed and torque adjustments are optional.

    · Speed regulator adaptive.

    · Current prediction regulator with adaptive function.

    · / 减少给定速度信号)。 Motorized potentiometer function (increase / decrease the given speed signal).

    · Jog function.

    8 个内部速度参考信号。 · Eight internal speed reference signals.

    5 个内部线性或 S 型给定积分器。 · 5 internal linear or S -type given integrators.

    · / 最小限幅,偏置等) Internal parameter adjustment (magnification, maximum / minimum limit, offset, etc.)

    · It can expand other functions of the device in special applications.

    QQ customer service